External Hard Drive System

broken image


Summary :

  1. Cheap External Hard Drive
  2. Mac External Hard Drive File System

What are the advantages of making external hard drive bootable? The first one is that you can use a bootable external hard drive to boot the unbootable computer. The second one is that when you don't want to use the system that comes with the computer, you can use bootable drive to boot the computer.

The external hard drive becomes unreadable and corrupted due to carelessly disconnecting or powering down the industry without following the eject drive protocol. You can fix corrupted hard drive with a quick scan on the PC with the disk checking utility and its drive repair function. Worst-case scenario, if you cannot fix the disk, then there is a way to recover all the valuable data, which. The best external hard drives for 2020 By Jon Martindale December 3, 2020 Almost nothing is worse than realizing you don't have enough space on your PC to store your latest files. External hard drives can make your digital life better in three key ways: first, by expanding the amount of photos, videos and other files you can save and store; second, by freeing up space on.

Quick Navigation :

Why Do You Need to Make External Hard Drive Bootable Windows 10?

There are a number of important reasons for users to make external hard drive bootable Windows 10. I have listed some reasons below.

  • When your Windows 10 fails to boot due to system corruption, hard drive failure, or a virus attack, you can easily boot your computer using the Windows 10 bootable external hard drive you created earlier to avoid being unable to use your computer at important times.
  • If you need to use a computer, but the computer is not around, then you can use the bootable drive to start other computers and use your own operating system anytime, anywhere.

How to Make External Hard Drive Bootable Windows 10?

How to make a Windows 10 bootable external drive? There are four methods for you. And Windows provides two built-in features to make a bootable external hard drive. Another two solutions, you need to download MiniTool software to make external hard drive bootable Windows 10.

Make External Hard Drive Bootable Windows 10 with Windows To Go

Most people know that external hard drive bootable Windows 10 can be created by Windows To Go function that comes with Windows 10. Windows To Go can be used to copy all the system related files to the external hard drive so as to make it bootable. Therefore, you can plug the USB drive into your computer and start the computer from the external hard drive.

However, there are several limitations for users to use this way to make external hard drive bootable Windows 10:

  • First, to use Windows To Go, your Windows 10 must be Enterprise or Education or Professional version. (In addition, Windows 8/8.1 Enterprise Edition has this feature, and other versions or operating systems do not have Windows To Go feature.)
  • Second, Windows To Go can only be run when the USB drive is certified and the storage space of it must be at least 32GB. If the USB drive does not have enough space or is not certified, Windows To Go cannot be used to create Windows bootable USB drive.

Then how to use Windows To Go to make Windows 10 bootable USB drive? The method is below.

Step 1:You need to download Windows 10 ISO file in your computer and insert a larger than 32GB certified USB drive into the computer.

Step 2: Type control panel in the search box at first and click Control Panel to continue.

Step 3: You can set view by Small icons or enter Windows To Go in the right top search box, and click Windows To Go to continue.

Step 4: Choose the drive you want to use in Create a Windows To Go workspace window. Then click on it and click Next to continue.

Step 5: Click Add search location to search for the Windows 10 ISO file and choose the Windows 10 ISO image to continue.

Step 6: Choose whether to set a BitLocker password. If you want to set a password, then enter your password, but you need to type your password to unlock the drive in the future. If not, click Skip to continue.

Step 7: All the data on the USB drive will be deleted because the USB drive will be reformatted. Remember to back up important files before click Create.

Step 8: After finishing, select Yes or No to boot the computer from the new created Windows 10 bootable USB drive or not. If you want to test whether the USB drive is bootable, choose Yes and click Save and restart. If not, select No and click Save and close.

After these operations, you can make USB drive bootable Windows 10. But there are limitations that don't suit everybody. Therefore, I highly recommend you try the second method to make external hard drive bootable Windows 10.

Use MiniTool ShadowMaker to Make External Hard Drive Bootable Windows 10

MiniTool ShadowMaker is a piece of powerful and effective software to back up the operating system, disk and partitions, files and folders. What's more, you can use it to sync files and folders quickly and safely. It can also clone disk making external hard drive bootable Windows 10. So why don't you just download it and have a try?

Step 1: Please launch MiniTool ShadowMaker first, then choose Local or Remote to get the main interface by clicking Connect.

Note: If you want to manage a remote computer, computers need to be on the same LAN.

Step 2: Please click Clone Disk on the Tools page to continue.

Step 3: Please click Source to choose the clone source, then choose system disk and click Finish to continue.

Step 4: Please click Destination to select the external hard disk to save the copy and click Finish to continue.

Tip: If your external hard disk is too small, then you cannot continue.

Step 5: After you have selected the source disk and the target disk, please click OK to continue.

Step 6: Please read the warning and click Yes.

Note: Please make sure that there is no important data on the target disk because all the data will be destroyed. If there is, please back up data at first.

Step 7: Please read the information in the pop-up window carefully: If both disks are connected to the computer, one will be marked as offline. Then click Yes and Finish to finish cloning disk.

Tip: If the Remaining Time is so long that you don't want to wait, you can check Shut down the computer when the operation is completed.

After you have read the steps above, you can clearly draw that this method is much easier and more convenient than the first method. Besides, you can transfer OS from one computer to another as long as they are in the same LAN.

Make External Hard Drive Bootable Windows 10 with Windows Command Prompt

If you are good at using Command Prompt, then you can also use Command Prompt to make external hard drive bootable Windows 10. But you also need to pay attention not to enter wrong command in case that you lose data or damage system files.

There are two things you need to do to make external hard drive bootable Windows 10.

Format external hard drive

In order to make external hard drive bootable Windows 10, you need to format external hard drive at first.

Step 1: Insert the external hard drive into your computer. Type cmd in the search box and right-click Command Prompt and choose Run as administrator to continue.

Step 2: You need to format the external hard drive first. Then type the following instructions one by one, and remember to press Enter every time after you typed instruction.

Cheap External Hard Drive

Diskpart> list disk > select disk n (n represents the drive letter of external hard drive) > clean > create partition primary >format fs=ntfs quick > assign letter=H (you can also choose other letter to assign primary partition) > exit

Copy files from a DVD to bootable USB using CMD

Above you have assigned the letter H to the external hard drive, and you have inserted a DVD inside the DVD drive to copy data from it to create a bootable USB drive. By default, the active directory of the Command Prompt's administrative permissions is located at C:WindowsSystem32>, so you need to set the DVD (G) as active directory using CMD.

Tip: Make sure that you have already inserted a DVD inside the DVD drive.

Step 1: Type G and press Enter in Command Prompt window at first, then enter cd boot and press Enter. (If the drive letter of the mounted DVD drive in the File Explorer is not G, you can change it.)

External hard drive pc

Step 2: Enter bootsect /nt60 H and press Enter. Then type exit and press Enter to close Command Prompt. Compare 1tb external hard drive. Microsoft office 2011 catalina.

As you can see, this method is too troublesome. And if you enter the wrong instructions, your computer could get in trouble. You may even lose your data, but you can use third-party software to recover data.

Use MiniTool Partition Wizard to Make External Hard Drive Bootable Windows 10

MiniTool Partition Wizard is also a piece of efficient software for you to make external hard drive bootable Windows 10. Besides, you can convert MBR disk to GPT disk and migrate OS to SSD/HD. So come to download MiniTool Partition Wizard and have a try.

Now follow the following steps and make external hard drive bootable Windows 10.

Step 1. Please download MiniTool Partition Wizard and launch it to open its main interface to continue.

Step 2. There are two options you can choose.

Option A: Select the disk which has OS installed and right-click it, then click Copy to continue.

Option B: Please click on the Copy Disk Wizard on the left action panel and click Next to continue.

Step 3. Please choose the external hard as the target disk, and click Next, then click Yes to continue.

Note: Please make sure you have backed up all important data on the target disk because the data on it will be destroyed. If you accidentally click Yes before you have backed up the data, you can use MiniTool Power Data Recovery to recover data.

Step 4. Please choose copy options and click Next to continue.

Step 5. Please read the notification on the interface and know how to use the external hard disk to boot the computer and then click Finish to continue.

Step 6. Please click Apply to copy the operating system to the external hard disk.

External Hard Drive System

Step 2: Enter bootsect /nt60 H and press Enter. Then type exit and press Enter to close Command Prompt. Compare 1tb external hard drive. Microsoft office 2011 catalina.

As you can see, this method is too troublesome. And if you enter the wrong instructions, your computer could get in trouble. You may even lose your data, but you can use third-party software to recover data.

Use MiniTool Partition Wizard to Make External Hard Drive Bootable Windows 10

MiniTool Partition Wizard is also a piece of efficient software for you to make external hard drive bootable Windows 10. Besides, you can convert MBR disk to GPT disk and migrate OS to SSD/HD. So come to download MiniTool Partition Wizard and have a try.

Now follow the following steps and make external hard drive bootable Windows 10.

Step 1. Please download MiniTool Partition Wizard and launch it to open its main interface to continue.

Step 2. There are two options you can choose.

Option A: Select the disk which has OS installed and right-click it, then click Copy to continue.

Option B: Please click on the Copy Disk Wizard on the left action panel and click Next to continue.

Step 3. Please choose the external hard as the target disk, and click Next, then click Yes to continue.

Note: Please make sure you have backed up all important data on the target disk because the data on it will be destroyed. If you accidentally click Yes before you have backed up the data, you can use MiniTool Power Data Recovery to recover data.

Step 4. Please choose copy options and click Next to continue.

Step 5. Please read the notification on the interface and know how to use the external hard disk to boot the computer and then click Finish to continue.

Step 6. Please click Apply to copy the operating system to the external hard disk.

Step 7. Please click Yes, then click Restart Now to copy system files to the external hard drive. After that, you can use your external hard disk to boot the computer.

Mac External Hard Drive File System

This method is also much more convenient than using Windows built features. So you can also use this method to make external hard drive bootable Windows 10.

Bottom Line

This article has introduced four solutions to make external hard drive bootable, which offers you different choices. But using Windows 10 built-in features not only has several limitations but also may cause data loss and operating system damaged. Using third-party software is safer and can save a lot of time for you. In addition, there are plenty of useful functions with MiniTool ShadowMaker and MiniTool Partition Wizard.

If you have any better advice or confusion, please leave comments below or send an email to [email protected].

Make External Hard Drive Bootable Windows 10 FAQ

  1. Launch MiniTool ShadowMaker, then click Connect.
  2. Click Clone Disk on the Tools page, then choose the system disk as the source and choose the external hard disk as the destination.
  3. Click OK and Yes to begin making an external hard drive bootable.
  4. Click Yes and Finish.
If you want to make a USB drive bootable, then you should make sure that there is no important data in it because all the data will be erased. Read this post to create a bootable USB drive - How Do You Make A Bootable USB Drive – Easy Tutorial.
Can you install Windows from an external hard drive?
Of course, you can install Windows from an external hard drive. And if you want to know detailed instructions to do that, then you should read this post carefully - How to Install Windows 10 on a New Hard Drive (with Pictures).
You should create Windows 10 installation media at first, then boot your computer with the installation media. Then choose the Language to install, Time and currency format, and Keyboard or input method. Click Install now and then follow the instructions to finish installing.

I'm a Windows 10 and Linux user. I'm familiar with installing and running Linux operating system from an external hard drive, which is very useful to me. I know the advantages of the portable operating system, so I've always wanted to be able to create a portable Windows 10 operating system. Is there any way to install and run Windows 10 from an external hard drive?

As we all know, Linux can be easily installed and run from an external hard drive as portable Linux OS. The portable Linux OS is very useful, because we can take it anywhere and use it on different computers. But for users accustomed to using Windows, Linux is not easy to use and has some functional limitations, so many Windows users want to be able to install Windows on an external hard drive. Here we'll show you how to install and run Windows 10 from an external hard drive with WinToUSB.

Tutorial to create Windows 10 To Go on an external hard drive and run Windows 10 from the external hard drive.

Step 1. Connect the USB drive to the computer, then run WinToUSB.

Step 2. Click the button, then click the button and select the Windows 10 installation ISO file from the open dialog box.

Step 3. WinToUSB scans for and lists installable operating systems in the Windows 10 installation ISO. Please select the edition of Windows you want to install, then click 'Next'.

Step 4. Select the destination USB drive in the drop-down list. If the USB drive is not correctly recognized by WinToUSB, you need to click the button for the program to recognize the USB drive.

Step 5. A pop-up will appear asking you if you want to format it to continue, select the partition scheme you want to use and click 'Yes' to format it. If you choose 'Keep the existing partition scheme', you need to manually prepare the partitions on the USB drive before this step, and here is the user guide on how to manually prepare partitions for Windows To Go. Please note that the 'Keep the existing partition scheme' option is valid only for an external disk.

Step 6. Select the system partition and boot partition from the partition list, the selected partitions will be marked as red, then click 'Next'.

Step 7. After clicking 'Next', WinToUSB begins installing Windows 10 to the USB drive.

Step 8. It takes some time to install. After installation restart the computer and change BIOS to boot from your USB drive.

Step 9. Windows 10 normal installation starts up and you have to complete all the installation steps. After that, you can install programs, copy files, etc.

Follow these simple steps, you can install and run Windows 10 from an external hard drive easily.

Related Guides





broken image